Q LOGIC CORPORATION
===================

   QLA 1240D

   Card Type       Hard drive controller card                     
   Chip Set        Unidentified                                   
   Maximum Onboard Unidentified                                   
   Memory          
   Hard Drives     Up to 30 SCSI-2 Fast/Wide/Differential         
   supported       devices,                                       
   Floppy drives   None                                           
   supported       
   Data Bus        32-bit PCI                                     

<gopher://bitreich.org/I/th99/c/P-R/21605-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |          Function          | Label |   Function    | Label |
   |----------------------------+-------+---------------+-------|
   | 68-pin SCSI connector -    |  J1   | LED connector |  J4   |
   | external                   |       |               |       |
   |----------------------------+-------+---------------+-------|
   | 68-pin SCSI connector -    |  J2   |               |       |
   | external                   |       |               |       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |                Function                 | Label | Position |
   |-----------------------------------------+-------+----------|
   |>> | Factory configured - do not alter   |  JP1  |  Closed  |
   |   | (BIOS bank)                         |       |          |
   |---+-------------------------------------+-------+----------|
   |>> | Factory configured - do not alter   |  JP2  |  Closed  |
   |   | (BIOS bank)                         |       |          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 TERMINATION CONFIGURATION                  |
   |------------------------------------------------------------|
   | Connector |   Controller   |     Termination Required      |
   |           |    Position    |                               |
   |-----------+----------------+-------------------------------|
   |    J1     | At end of SCSI |   Internal host terminators   |
   |           |      bus       |   RM9, RM11 & RM15 removed    |
   |-----------+----------------+-------------------------------|
   |    J1     | Not at end of  |   Internal host terminators   |
   |           |    SCSI bus    |        RM9-RM6 removed        |
   |-----------+----------------+-------------------------------|
   |    J2     | At end of SCSI |   Internal host terminators   |
   |           |      bus       |    RM1, RM7 & RM8 removed     |
   |-----------+----------------+-------------------------------|
   |    J2     | Not at end of  |   Internal host terminators   |
   |           |    SCSI bus    |        RM1-RM8 removed        |
   +------------------------------------------------------------+