PINE TECHNOLOGY
===============

   PT-606G

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:         | 16-bit ISA                             |
   |-------------------+----------------------------------------|
   | Size:             | Half-length, full-height card          |
   |-------------------+----------------------------------------|
   | Hard drive        | Two IDE(AT) drives                     |
   | supported:        |                                        |
   |-------------------+----------------------------------------|
   | Floppy drives     | Two 360KB, 720KB, 1.2MB, or 1.44MB     |
   | supported:        | drives                                 |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/P-R/20881-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                 Function                 |    Location     |
   |------------------------------------------+-----------------|
   | 16-pin game port                         |       CN1       |
   |------------------------------------------+-----------------|
   | 40-pin IDE(AT) connector                 |       CN2       |
   |------------------------------------------+-----------------|
   | 34-pin cable connector - floppy drive    |       CN3       |
   |------------------------------------------+-----------------|
   | 9-pin serial port 1 - external           |       CN4       |
   |------------------------------------------+-----------------|
   | 10-pin serial port 2 - internal          |       CN5       |
   |------------------------------------------+-----------------|
   | 25-pin parallel port - external          |       CN6       |
   |------------------------------------------+-----------------|
   | 2-pin connector - drive active LED       |       JP2       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |              Function              | Location |  Setting   |
   |------------------------------------+----------+------------|
   |>> | IDE(AT) interface enabled      |    J6    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | IDE(AT) interface disabled     |    J6    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Game port enabled              |    J7    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Game port disabled             |    J7    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Floppy drive interface enabled |    J9    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Floppy drive interface         |    J9    | pins 2 & 3 |
   |   | disabled                       |          |   closed   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |           USER CONFIGURABLE SETTINGS (CONTINUED)           |
   |------------------------------------------------------------|
   |              Function              | Location |  Setting   |
   |------------------------------------+----------+------------|
   |>> | Hard drive is installed        |   J10    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Hard drive is not installed    |   J10    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Secure power source is in use  |   JP3    |   closed   |
   |   | by printer (standard current)  |          |            |
   |---+--------------------------------+----------+------------|
   |   | Low-end power source is in use |   JP3    |    open    |
   |   | by printer (isolate current)   |          |            |
   |------------------------------------------------------------|
   | Note: The size and significance of jumper JP1 is           |
   | unidentified.                                              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              PARALLEL PORT ADDRESS SELECTION               |
   |------------------------------------------------------------|
   |       LPT        | Address |        J1        |     J8     |
   |------------------+---------+------------------+------------|
   |>> |     LPT1     |  378h   |    pins 1 & 2    | pins 1 & 2 |
   |   |              |         |      closed      |   closed   |
   |---+--------------+---------+------------------+------------|
   |   |     LPT2     |  278h   |    pins 1 & 2    | pins 2 & 3 |
   |   |              |         |      closed      |   closed   |
   |---+--------------+---------+------------------+------------|
   |   | Disable LPT1 |   N/A   |    pins 2 & 3    | pins 1 & 2 |
   |   |              |         |      closed      |   closed   |
   |---+--------------+---------+------------------+------------|
   |   | Disable LPT2 |   N/A   |    pins 2 & 3    | pins 2 & 3 |
   |   |              |         |      closed      |   closed   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               SERIAL PORT ADDRESS SELECTION                |
   |------------------------------------------------------------|
   | Port 1 (CN4) |  Port 2   |   J2   |   J3   |  J4   |  J5   |
   |              |   (CN5)   |        |        |       |       |
   |--------------+-----------+--------+--------+-------+-------|
   |>> |   COM1   |   COM2    | pins 1 | pins 1 | pins  | pins  |
   |   |          |           |  & 2   |  & 2   | 1 & 2 | 1 & 2 |
   |---+----------+-----------+--------+--------+-------+-------|
   |   |   COM1   |   COM4    | pins 1 | pins 2 | pins  | pins  |
   |   |          |           |  & 2   |  & 3   | 1 & 2 | 1 & 2 |
   |---+----------+-----------+--------+--------+-------+-------|
   |   |   COM3   |   COM2    | pins 1 | pins 1 | pins  | pins  |
   |   |          |           |  & 2   |  & 2   | 2 & 3 | 1 & 2 |
   |---+----------+-----------+--------+--------+-------+-------|
   |   |   COM3   |   COM4    | pins 1 | pins 2 | pins  | pins  |
   |   |          |           |  & 2   |  & 3   | 2 & 3 | 1 & 2 |
   |---+----------+-----------+--------+--------+-------+-------|
   |   |   COM1   | Disabled  | pins 2 | pins 1 | pins  | pins  |
   |   |          |           |  & 3   |  & 2   | 1 & 2 | 1 & 2 |
   |---+----------+-----------+--------+--------+-------+-------|
   |   |   COM3   | Disabled  | pins 2 | pins 2 | pins  | pins  |
   |   |          |           |  & 3   |  & 3   | 2 & 3 | 1 & 2 |
   |---+----------+-----------+--------+--------+-------+-------|
   |   | Disabled |   COM2    | pins 1 | pins 1 | pins  | pins  |
   |   |          |           |  & 2   |  & 2   | 1 & 2 | 2 & 3 |
   |---+----------+-----------+--------+--------+-------+-------|
   |   | Disabled |   COM4    | pins 1 | pins 2 | pins  | pins  |
   |   |          |           |  & 2   |  & 3   | 1 & 2 | 2 & 3 |
   |---+----------+-----------+--------+--------+-------+-------|
   |   | Disabled | Disabled  | pins 2 | pins 1 | pins  | pins  |
   |   |          |           |  & 3   |  & 2   | 2 & 3 | 2 & 3 |
   |------------------------------------------------------------|
   | Note: Pins designated should be in the closed position.    |
   +------------------------------------------------------------+