RELIALOGIC CORPORATION PRIVATE, LTD. ==================================== CA8972 +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 32-bit, VL-Bus | |-------------------+----------------------------------------| | Size: | Three quarter-length, half-height card | |-------------------+----------------------------------------| | Hard drive | Two IDE (AT) interface drives | | supported: | | |-------------------+----------------------------------------| | Floppy drives | 360KB, 720KB, 1.2MB, or 1.44MB drives | | supported: | | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-------------------------------------------------+----------| | 40-pin primary IDE(AT) interface | CN1 | |-------------------------------------------------+----------| | 40-pin secondary IDE(AT) interface | CN2 | |-------------------------------------------------+----------| | 34-pin control cable connector - floppy drive | CN3 | |-------------------------------------------------+----------| | 16-pin game port | CN4 | |-------------------------------------------------+----------| | 10-pin serial port 1 - internal & 9-pin serial | CN5 | | port 1 - external | | |-------------------------------------------------+----------| | 10-pin serial port 2 - internal | CN6 | |-------------------------------------------------+----------| | 25-pin parallel port | CN7 | |-------------------------------------------------+----------| | 2-pin drive active LED for primary IDE | JP1 | |-------------------------------------------------+----------| | 2-pin drive active LED for secondary IDE | JP2 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Primary IDE interface enabled | JP5 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Primary IDE interface disabled | JP5 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Secondary IDE interface | JP6 | pins 1 & 2 | | | enabled | | closed | |---+--------------------------------+----------+------------| | | Secondary IDE interface | JP6 | pins 2 & 3 | | | disabled | | closed | |---+--------------------------------+----------+------------| |>> | Floppy drive interface enabled | JP8 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Floppy drive interface | JP8 | pins 2 & 3 | | | disabled | | closed | |---+--------------------------------+----------+------------| |>> | Game port enabled | JP14 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Game port disabled | JP14 | pins 2 & 3 | | | | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT CONFIGURATION | |------------------------------------------------------------| | LPT | JP7 | JP13 | |------------------+--------------------+--------------------| |>> | LPT2 | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | LPT3 | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | n/a | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 CONFIGURATION | |------------------------------------------------------------| | COM | JP9 | JP10 | |------------------+--------------------+--------------------| |>> | COM1 | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM3 | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | n/a | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 CONFIGURATION | |------------------------------------------------------------| | COM | JP11 | JP12 | |------------------+--------------------+--------------------| |>> | COM2 | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM4 | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | n/a | +------------------------------------------------------------+ +------------------------------------------------------------+ | HDD SPEED CONFIGURATION | |------------------------------------------------------------| | CPU Clock Speed | JP3 | JP4 | |------------------+---------------------+-------------------| | > 50MHz | pins 1 & 2 closed | pins 1 & 2 closed | |------------------+---------------------+-------------------| | 40/50 MHz | pins 2 & 3 closed | pins 2 & 3 closed | |------------------+---------------------+-------------------| | 25/33 MHz | pins 2 & 3 closed | pins 1 & 2 closed | |------------------+---------------------+-------------------| | <20MHz | pins 1 & 2 closed | pins 2 & 3 closed | |------------------------------------------------------------| | Note: The HDD speed is configured according to the CPU | | clock. | +------------------------------------------------------------+