PROMISE TECHNOLOGY, INC.
========================

   DC4030VL

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:     | 32-bit, VL-bus                             |
   |---------------+--------------------------------------------|
   | Size:         | Three/quarter-length, full-height card     |
   |---------------+--------------------------------------------|
   | Hard drive    | Four IDE (AT) Interface drives             |
   | supported:    |                                            |
   |---------------+--------------------------------------------|
   | Floppy drives | Four 360KB, 720KB, 1.2MB, 1.44MB, or       |
   | supported:    | 2.88MB drives                              |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/P-R/20482-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                    Function                     | Location |
   |-------------------------------------------------+----------|
   | 34-pin control cable connector - floppy drive   |    J1    |
   | BUS-0                                           |          |
   |-------------------------------------------------+----------|
   | 34-pin control cable connector - floppy drive   |    J2    |
   | BUS-1                                           |          |
   |-------------------------------------------------+----------|
   | 40-pin IDE (AT) Interface connector IDE-0       |    J3    |
   |-------------------------------------------------+----------|
   | 40-pin IDE (AT) Interface connector IDE-1       |    J4    |
   |-------------------------------------------------+----------|
   | 4-pin connector - drive active LED              |   JP1    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |            Function             |  Location   |  Setting   |
   |---------------------------------+-------------+------------|
   |>>   | Floppy drive enabled      |     JP2     |   Closed   |
   |-----+---------------------------+-------------+------------|
   |     | Floppy drive disabled     |     JP2     |    Open    |
   |-----+---------------------------+-------------+------------|
   |>>   | VL-bus ID3 signal support |     JP4     |   Closed   |
   |     | enabled*                  |             |            |
   |-----+---------------------------+-------------+------------|
   |     | VL-bus ID3 signal support |     JP4     |    Open    |
   |     | disabled*                 |             |            |
   |------------------------------------------------------------|
   | *Note: Open JP4 if your motherboard is 50MHz 486 and does  |
   | not support ID3 signal.                                    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   |  At least one pair SIMM of memory modules (256KB, 1MB, or  |
   | 4MB) of the same size must be installed in Bank 0 in order |
   |              for the controller to function.               |
   +------------------------------------------------------------+