QUICKPATH SYSTEMS, INC. ======================= PORTFOLIO 450, PORTFOLIO 550E +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 16-bit, ISA | |-------------------+----------------------------------------| | Size: | Three/quarter-length, full-height card | |-------------------+----------------------------------------| | Hard drive | Two IDE (AT) Interface drives | | supported: | | |-------------------+----------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, or 1.44MB | | supported: | drives | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-------------------------------------------------+----------| | 40-pin IDE(AT) Interface connector | CN1 | |-------------------------------------------------+----------| | 34-pin control cable connector - floppy drive 1 | CN2 | | & 2 | | |-------------------------------------------------+----------| | 34-pin control cable connector - floppy drive 3 | CN3 | | & 4 | | |-------------------------------------------------+----------| | 25-pin parallel port-internal (enabled on | CN4 | | PortFolio 550E only) | | |-------------------------------------------------+----------| | 9-pin serial port #4-internal | CN5 | |-------------------------------------------------+----------| | 9-pin serial port #3-internal | CN6 | |-------------------------------------------------+----------| | 9-pin serial port #2-internal | CN7 | |-------------------------------------------------+----------| | 9-pin serial port #1-internal | CN8 | |-------------------------------------------------+----------| | 15-pin game port-external | CN9 | |-------------------------------------------------+----------| | 25-pin parallel port-external | CN10 | |-------------------------------------------------+----------| | 4-pin connector-drive active LED | JP1 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | IRQ14 delay disabled | JP2 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | IRQ14 delay enabled | JP2 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Floppy drive enabled | JP3 | closed | |---+--------------------------------+----------+------------| | | Floppy drive disabled | JP3 | open | |---+--------------------------------+----------+------------| |>> | Floppy drive address is | JP4 | open | | | 3F0-3F7h | | | |---+--------------------------------+----------+------------| | | Floppy drive address is | JP4 | closed | | | 370-377h | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Serial port 1 (CN8) is set to | JP6 | pins 2 & 3 | | | COM1 (3F8-3FFh) | | closed | |---+--------------------------------+----------+------------| | | Serial port 1 (CN8) is set to | JP6 | pins 1 & 2 | | | COM2 (2F8-2FFh) | | closed | |---+--------------------------------+----------+------------| | | Serial port 1 disabled | JP6 | open | |---+--------------------------------+----------+------------| |>> | Serial port 2 (CN7) is set to | JP7 | pins 1 & 2 | | | COM2 (2F8-2FFh) | | closed | |---+--------------------------------+----------+------------| | | Serial port 2 (CN7) is set to | JP7 | pins 2 & 3 | | | COM1 (3F8-3FFh) | | closed | |---+--------------------------------+----------+------------| | | Serial port 2 disabled | JP7 | open | |---+--------------------------------+----------+------------| |>> | Serial port 3 (CN6) is set to | JP8 | pins 2 & 3 | | | COM3 (3E8-3EFh) | | closed | |---+--------------------------------+----------+------------| | | Serial port 3 (CN6) is set to | JP8 | pins 1 & 2 | | | COM4 (2E8-2EFh) | | closed | |---+--------------------------------+----------+------------| | | Serial port 3 disabled | JP8 | open | |---+--------------------------------+----------+------------| |>> | Serial port 4 (CN5) is set to | JP9 | pins 1 & 2 | | | COM4 (2E8-2EFh) | | closed | |---+--------------------------------+----------+------------| | | Serial port 4 (CN5) is set to | JP9 | pins 2 & 3 | | | COM3 (3E8-3EFh) | | closed | |---+--------------------------------+----------+------------| | | Serial port 4 disabled | JP9 | open | |---+--------------------------------+----------+------------| |>> | Parallel port 1 (CN10) is set | JP10 | pins 2 & 3 | | | to LPT1 (378-37Fh) | | closed | |---+--------------------------------+----------+------------| | | Parallel port 1 (CN10) is set | JP10 | pins 1 & 2 | | | to LPT2 (278-27Fh) | | closed | |---+--------------------------------+----------+------------| | | Parallel port 1 disabled | JP10 | open | |---+--------------------------------+----------+------------| |>> | Parallel port 2 (CN4) is set | JP11 | pins 1 & 2 | | | to LPT2 (278-27Fh) | | closed | |---+--------------------------------+----------+------------| | | Parallel port 2 (CN4) is set | JP11 | pins 2 & 3 | | | to LPT1 (378-37Fh) | | closed | |---+--------------------------------+----------+------------| | | Parallel port 2 disabled | JP11 | open | |---+--------------------------------+----------+------------| |>> | Serial port 1 (CN8) is IRQ4 | JP12 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 1 (CN8) is IRQ3 | JP12 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 1 IRQ is disabled | JP12 | open | |---+--------------------------------+----------+------------| |>> | Serial port 2 (CN7) is IRQ3 | JP13 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 2 (CN7) is IRQ4 | JP13 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 2 IRQ is disabled | JP13 | open | |---+--------------------------------+----------+------------| |>> | Serial port 3 (CN6) is IRQ4 | JP14 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 3 (CN6) is IRQ3 | JP14 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 3 IRQ is disabled | JP14 | open | |---+--------------------------------+----------+------------| |>> | Serial port 4 (CN5) is IRQ3 | JP15 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 4 (CN5) is IRQ4 | JP15 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 4 IRQ is disabled | JP15 | open | |---+--------------------------------+----------+------------| | | Serial port 3 (CN6) is IRQ5 | JP16 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 3 (CN6) is IRQ9 | JP16 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Serial port 3 IRQ is disabled | JP16 | open | |---+--------------------------------+----------+------------| | | Serial port 4 (CN5) is IRQ5 | JP17 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 4 (CN5) is IRQ9 | JP17 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Serial port 4 IRQ is disabled | JP17 | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Parallel port 1 (CN10) is IRQ7 | JP18 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Parallel port 1 (CN10) is IRQ5 | JP18 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Parallel port 1 IRQ is | JP18 | open | | | disabled | | | |---+--------------------------------+----------+------------| |>> | Parallel port 2 (CN4) is IRQ5 | JP19 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Parallel port 2 (CN4) is IRQ7 | JP19 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Parallel port 2 IRQ is | JP19 | open | | | disabled | | | |---+--------------------------------+----------+------------| |>> | Hard drive enabled | JP20 | closed | |---+--------------------------------+----------+------------| | | Hard drive disabled | JP20 | open | |---+--------------------------------+----------+------------| | | Serial port 3 (CN6) is IRQ10 | JP16 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 3 (CN6) is IRQ11 | JP16 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Serial port 3 IRQ is disabled | JP17 | open | |---+--------------------------------+----------+------------| | | Serial port 4 (CN5) is IRQ12 | JP17 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 4 (CN5) is IRQ15 | JP17 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Serial port 4 IRQ is disabled | JP17 | open | |---+--------------------------------+----------+------------| |>> | Parallel port 1 is | JP25 | pins 1 & 2 | | | uni-directional | | closed | |---+--------------------------------+----------+------------| | | Parallel port 1 is | JP25 | pins 2 & 3 | | | bi-directional | | closed | |---+--------------------------------+----------+------------| |>> | Parallel port 2 is | JP26 | pins 1 & 2 | | | uni-directional | | closed | |---+--------------------------------+----------+------------| | | Parallel port 2 is | JP26 | pins 2 & 3 | | | bi-directional | | closed | +------------------------------------------------------------+