PINE TECHNOLOGY =============== PT-603 +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 16-bit, ISA | |-------------------+----------------------------------------| | Size: | Half-length, half-height card | |-------------------+----------------------------------------| | Hard drive | Two IDE (AT) Interface drives | | supported: | | |-------------------+----------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, or 1.44MB | | supported: | drives | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-----------------------------------------------+------------| | 40-pin IDE(AT) Interface connector | JP1 | |-----------------------------------------------+------------| | 4-pin connector - Drive active LED | JP2 | |-----------------------------------------------+------------| | 34-pin control cable connector - floppy drive | JP3 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |-------------------------------+--------------+-------------| |>> | Floppy drive enabled | JP4 | closed | |---+---------------------------+--------------+-------------| | | Floppy drive disabled | JP4 | open | +------------------------------------------------------------+