PINE TECHNOLOGY
===============

   PT-604

   +------------------------------------------------------------+
   +------------------------------------------------------------+

   Data bus: 16-bit, ISA

   Size: Half-length, full-height card

   Hard drives supported:  Two IDE (AT) Interface drives

   Floppy drives supported: Two 360KB, 720KB, 1.2MB or 1.44MB
   drives

<gopher://bitreich.org/I/th99/c/P-R/20303-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                   Function                   |  Location   |
   |----------------------------------------------+-------------|
   | 9-pin serial port 1 (COM1/3)-internal        |     CN1     |
   |----------------------------------------------+-------------|
   | 25-pin parallel port (LPT1/2)-external       |     CN2     |
   |----------------------------------------------+-------------|
   | 40-pin AT Interface (IDE) connector-internal |     CN3     |
   |----------------------------------------------+-------------|
   | 34-pin control cable connector-floppy drive  |     CN4     |
   |----------------------------------------------+-------------|
   | 16-pin game port-internal                    |     CN5     |
   |----------------------------------------------+-------------|
   | 9-pin serial port 2 (COM2/4)-internal        |     CN6     |
   |----------------------------------------------+-------------|
   | 4-pin connector-drive active LED             |     CN7     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |              Function              | Location |  Setting   |
   |------------------------------------+----------+------------|
   |>> | Floppy drive controller        |   JP1    | pins 1 & 2 |
   |   | enabled                        |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Floppy drive controller        |   JP1    | pins 2 & 3 |
   |   | disabled                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Hard drive port address is     |   JP2    | pins 1 & 2 |
   |   | 1F0-1F7h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Hard drive port address is     |   JP2    | pins 2 & 3 |
   |   | 170-177h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Floppy drive port address is   |   JP3    | pins 1 & 2 |
   |   | 3F1-3F7h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Floppy drive port address is   |   JP3    | pins 2 & 3 |
   |   | 371-377h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Hard drive controller enabled  |   JP4    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Hard drive controller disabled |   JP4    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Parallel Port (CN2) is set to  |   JP5    | pins 1 & 2 |
   |   | LPT1 (378h)                    |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Parallel Port (CN2) is set to  |   JP5    | pins 2 & 3 |
   |   | LPT2 (278h)                    |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial Port 1 (CN1) is set to  |   JP6    | pins 1 & 2 |
   |   | COM1 (3F8h)                    |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial Port 1 (CN1) is set to  |   JP6    | pins 2 & 3 |
   |   | COM3 (3E8h)                    |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial Port 2 (CN6) is set to  |   JP7    | pins 1 & 2 |
   |   | COM2 (2F8h)                    |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial Port 2 (CN6) is set to  |   JP7    | pins 2 & 3 |
   |   | COM4 (2E8h)                    |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial Port 2 (CN6) is enabled |   JP8    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial Port 2 (CN6) is         |   JP8    | pins 2 & 3 |
   |   | disabled                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial Port 1 (CN1) is enabled |   JP9    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial Port 1 (CN1) is         |   JP9    | pins 2 & 3 |
   |   | disabled                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Parallel Port (CN2) enabled    |   JP10   | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Parallel Port (CN2) disabled   |   JP10   | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Floppy drive controller        |   JP11   | pins 2 & 3 |
   |   | enabled                        |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Floppy drive controller        |   JP11   | pins 1 & 2 |
   |   | disabled                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Game Port (CN5) enabled        |   JP14   | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Game Port (CN5) disabled       |   JP14   | pins 2 & 3 |
   |   |                                |          |   closed   |
   +------------------------------------------------------------+