PERCEPTIVE SOLUTIONS, INC. ========================== EASYCACHE ESDI, EASYCACHE PRO ESDI +------------------------------------------------------------+ +------------------------------------------------------------+ Data bus: 16-bit, ISA Size: Full-length, full-height card Hard Drives Suppported: Two ESDI drives Floppy Drives Supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |---------------------------------------------+--------------| | 4-pin connector-drive active LED | J1 | |---------------------------------------------+--------------| | 9-pin serial port | J2 | |---------------------------------------------+--------------| | 20-pin data cable connector-drive 0 | J3 | |---------------------------------------------+--------------| | 20-pin data cable connector-drive 1 | J4 | |---------------------------------------------+--------------| | 34-pin control cable connector-hard drive | J5 | |---------------------------------------------+--------------| | 34-pin control cable connector-floppy drive | J6 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |-----------------------------------+--------------+---------| |>> | Hard drive port address | SW1/switch 3 | off | | | 1F0-1F7, 3F0-3F1, 3F7h | | | |---+-------------------------------+--------------+---------| | | Hard drive port address | SW1/switch 3 | on | | | 170-177, 370-371, 377h | | | |---+-------------------------------+--------------+---------| |>> | Floppy drive enabled | SW1/switch 4 | off | |---+-------------------------------+--------------+---------| | | Floppy drive disabled | SW1/switch 4 | on | |---+-------------------------------+--------------+---------| |>> | Single-speed floppy supported | SW1/switch 5 | off | |---+-------------------------------+--------------+---------| | | Dual-speed floppy supported | SW1/switch 5 | on | |---+-------------------------------+--------------+---------| |>> | Factory configured - do not | SW1/switch | off | | | alter | 10 | | |---+-------------------------------+--------------+---------| |>> | hSOS load enabled | SW1/switch | off | | | | 11 | | |---+-------------------------------+--------------+---------| | | hSOS load disabled | SW1/switch | on | | | | 11 | | |---+-------------------------------+--------------+---------| |>> | Factory configured - do not | SW1/switch | off | | | alter | 12 | | +------------------------------------------------------------+ +------------------------------------------------------------+ | BIOS ADDRESS | |------------------------------------------------------------| | Address | SW1/switch 1 | SW1/switch 2 | |--------------------+-------------------+-------------------| |>> | D800h | on | off | |---+----------------+-------------------+-------------------| | | D000h | off | on | |---+----------------+-------------------+-------------------| | | C800h | off | off | |---+----------------+-------------------+-------------------| | | Disabled | on | on | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT REQUEST | |------------------------------------------------------------| | IRQ |SW1/switch 6|SW1/switch 7|SW1/switch |SW1/switch | | | | | 8 | 9 | |----------+------------+------------+-----------+-----------| |>>| IRQ14 | off | off | on | off | |-+--------+------------+------------+-----------+-----------| | | IRQ5 | on | off | off | off | |-+--------+------------+------------+-----------+-----------| | | IRQ12 | off | on | off | off | |-+--------+------------+------------+-----------+-----------| | | IRQ15 | off | off | off | on | |-+--------+------------+------------+-----------+-----------| | |Disabled| off | off | off | off | +------------------------------------------------------------+ +------------------------------------------------------------+ | CACHE MEMORY CONFIGURATION | |------------------------------------------------------------| | Size | Bank 0 | Bank 1 | |---------------+-----------------------+--------------------| | 512KB | (2) 256K x 9 | NONE | |---------------+-----------------------+--------------------| | 1MB | (2) 256K x 9 | (2) 256K x 9 | |---------------+-----------------------+--------------------| | 2MB | (2) 1M x 9 | NONE | |---------------+-----------------------+--------------------| | 2.5MB | (2) 1M x 9 | (2) 256K x 9 | |---------------+-----------------------+--------------------| | 4MB | (2) 1M x 9 | (2) 1M x 9 | |---------------+-----------------------+--------------------| | 8MB* | (2) 4M x 9 | NONE | |---------------+-----------------------+--------------------| | 8.5MB* | (2) 4M x 9 | (2) 256K x 9 | |---------------+-----------------------+--------------------| | 10MB* | (2) 4M x 9 | (2) 1M x 9 | |---------------+-----------------------+--------------------| | 16MB* | (2) 4M x 9 | (2) 4M x 9 | |------------------------------------------------------------| | Notes:* 4MBx9 SIMM's are supported only by the easyCACHE | | Pro controlller | +------------------------------------------------------------+ +------------------------------------------------------------+ | LED INFORMATION | |------------------------------------------------------------| | Hard drive read, write, or seek in progress. | D1 | | | | | Lights solid to indicate dirty cache | | |---------------------------------------------------+--------| | Data transfer between cache and host in progress. | D2 | +------------------------------------------------------------+