INITIO CORPORATION
==================

   INI-9100UW

   Data Bus                32-bit PCI                             
   Card Size               Quarter-length, full-height card       
   Hard Drives supported   Up to 15 SCSI devices                  
   Floppy drives supported None                                   

<gopher://bitreich.org/I/th99/c/I-L/21018-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |  Function   | Location |        Function        | Location |
   |-------------+----------+------------------------+----------|
   | 50-pin SCSI |    J1    | 4-pin connector -      |    J3    |
   | connector - |          | drive active LED       |          |
   | internal    |          |                        |          |
   |-------------+----------+------------------------+----------|
   | 50-pin SCSI |    J2    | 68-pin SCSI connector  |    J4    |
   | connector - |          | - internal             |          |
   | external    |          |                        |          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |                Function                | Label | Position  |
   |----------------------------------------+-------+-----------|
   |>> | Host adapter is only one in system |  JP1  |   Open    |
   |---+------------------------------------+-------+-----------|
   |   | Host adapter shares SCSI bus with  |  JP1  |  Closed   |
   |   | adapter in another computer        |       |           |
   |------------------------------------------------------------|
   |      Note: Closing jumper JP1 sets active termination so   |
   |      it is always on. The setting is used when the adapter |
   |      shares the SCSI bus with an adapter in another        |
   |      computer. If this computer can be turned off, closing |
   |      the jumper will insure that active on-board           |
   |      termination is on all the time, regardless of whether |
   |      power is applied or not.                              |
   +------------------------------------------------------------+