ELITEGROUP COMPUTER SYSTEMS, INC.
=================================

   CI-92C

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:         | 16-bit, ISA                            |
   |-------------------+----------------------------------------|
   | Size:             | Half-length, half-height card          |
   |-------------------+----------------------------------------|
   | Hard drives       | Two IDE (AT) Interface drives          |
   | supported:        |                                        |
   |-------------------+----------------------------------------|
   | Floppy drives     | Two 360KB, 720KB, 1.2MB, or 1.44MB     |
   | supported:        | drives                                 |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/E-H/20360-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                   Function                    |  Location  |
   |-----------------------------------------------+------------|
   | 40-pin IDE(AT) Interface connector            |    JP1     |
   |-----------------------------------------------+------------|
   | 34-pin control cable connector - floppy drive |    JP3     |
   |-----------------------------------------------+------------|
   | 10-pin serial port (COM2/3/4) - internal      |    JP4     |
   |-----------------------------------------------+------------|
   | 4-pin connector - Drive active LED            |    JP5     |
   |-----------------------------------------------+------------|
   | 15-pin game port - internal                   |    JP6     |
   |-----------------------------------------------+------------|
   | 10-pin serial port (COM1/3/4) - internal      |     J1     |
   |-----------------------------------------------+------------|
   | 25-pin parallel port (LPT1/2/3) - external    |     J2     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |              Function              | Location |  Setting   |
   |------------------------------------+----------+------------|
   |   | Single hard drive supported    |   JP2    |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Two hard drives supported      |   JP2    |    open    |
   |---+--------------------------------+----------+------------|
   |>> | Parallel port is               |   JP13   |   closed   |
   |   | uni-directional                |          |            |
   |---+--------------------------------+----------+------------|
   |   | Parallel port is               |   JP13   |    open    |
   |   | bi-directional                 |          |            |
   |---+--------------------------------+----------+------------|
   |>> | Floppy drive enabled           |   JP14   | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Floppy drive disabled          |   JP14   | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Hard drive port address is     |   JP15   | pins 1 & 2 |
   |   | 1F0-1F7, 3F6 & 3F7h            |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Hard drive port address is     |   JP15   | pins 2 & 3 |
   |   | 170-177, 376 & 377h            |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Hard drive enabled             |   JP16   | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Hard drive disabled            |   JP16   | pins 1 & 2 |
   |   |                                |          |   closed   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |              Function              | Location |  Setting   |
   |------------------------------------+----------+------------|
   |>> | Floppy drive port address is   |   JP17   | pins 1 & 2 |
   |   | 3F0-3F7h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Floppy drive port address is   |   JP17   | pins 2 & 3 |
   |   | 370-377h                       |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Game port (JP6) enabled        |   JP19   | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Game Port (JP6) disabled       |   JP19   | pins 1 & 2 |
   |   |                                |          |   closed   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |        SERIAL PORT 1 (J1) INTERRUPT REQUEST - JP18         |
   |------------------------------------------------------------|
   |      IRQ       |   Jumper 1   |   Jumper 2   |  Jumper 3   |
   |----------------+--------------+--------------+-------------|
   |>>  |   IRQ4    |    closed    |     open     |    open     |
   |----+-----------+--------------+--------------+-------------|
   |    |   IRQ3    |     open     |    closed    |    open     |
   |----+-----------+--------------+--------------+-------------|
   |    |   IRQ5    |     open     |     open     |   closed    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |        SERIAL PORT 2 (JP4) INTERRUPT REQUEST - JP18        |
   |------------------------------------------------------------|
   |      IRQ       |   Jumper 4    |  Jumper 5   |  Jumper 6   |
   |----------------+---------------+-------------+-------------|
   |>>  |   IRQ3    |    closed     |    open     |    open     |
   |----+-----------+---------------+-------------+-------------|
   |    |   IRQ4    |     open      |   closed    |    open     |
   |----+-----------+---------------+-------------+-------------|
   |    |   IRQ5    |     open      |    open     |   closed    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |        PARALLEL PORT (J2) INTERRUPT REQUEST - JP18         |
   |------------------------------------------------------------|
   |         IRQ          |     Jumper 7     |     Jumper 8     |
   |----------------------+------------------+------------------|
   |>>     |     IRQ7     |      closed      |       open       |
   |-------+--------------+------------------+------------------|
   |       |     IRQ5     |       open       |      closed      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              SERIAL PORT 1 (J1) CONFIGURATION              |
   |------------------------------------------------------------|
   |       COM        |     Jumper JP7     |     Jumper JP8     |
   |------------------+--------------------+--------------------|
   |   | COM4 (2E8h)  | pins 2 & 3 closed  | pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |>> | COM1 (3F8h)  | pins 2 & 3 closed  | pins 1 & 2 closed  |
   |---+--------------+--------------------+--------------------|
   |   | COM3 (3E8h)  | pins 1 & 2 closed  | pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |   |   Disabled   | pins 1 & 2 closed  | pins 1 & 2 closed  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |             SERIAL PORT 2 (JP4) CONFIGURATION              |
   |------------------------------------------------------------|
   |       COM        |     Jumper JP9     |    Jumper JP10     |
   |------------------+--------------------+--------------------|
   |   | COM3 (3E8h)  | pins 2 & 3 closed  | pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |>> | COM2 (2F8h)  | pins 2 & 3 closed  | pins 1 & 2 closed  |
   |---+--------------+--------------------+--------------------|
   |   | COM4 (2E8h)  | pins 1 & 2 closed  | pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |   |   Disabled   | pins 1 & 2 closed  | pins 1 & 2 closed  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              PARALLEL PORT (J2) CONFIGURATION              |
   |------------------------------------------------------------|
   |       LPT        |    Jumper JP11     |    Jumper JP12     |
   |------------------+--------------------+--------------------|
   |   | LPT3 (3BCH)  | pins 2 & 3 closed  | pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |>> | LPT2 (278H)  | pins 1 & 2 closed  | pins 2 & 3 closed  |
   |---+--------------+--------------------+--------------------|
   |   | LPT1 (378H)  | pins 2 & 3 closed  | pins 1 & 2 closed  |
   |---+--------------+--------------------+--------------------|
   |   |   Disabled   | pins 1 & 2 closed  | pins 1 & 2 closed  |
   +------------------------------------------------------------+