DIVERSE LOGISTICS INC.
======================

   WINDJAMMER

   Maximum Onboard       16MB DRAM (on optional cache controller) 
   Memory                
   Hard Drives supported Fourteen SCSI-2 devices                  
   Floppy drives         None                                     
   supported             
   Data Bus              External                                 
   Card Size             14cm x 23 cm                             
   RAID levels supported 0,1                                      

<gopher://bitreich.org/I/th99/c/C-D/21414-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |     Function     | Location |     Function      | Location |
   |------------------+----------+-------------------+----------|
   | Proprietary      |   CN1    | Proprietary       |   CN6    |
   | connector -      |          | connector -       |          |
   | cache controller |          | differential      |          |
   | (optional)       |          | converter board   |          |
   |                  |          | (optional)        |          |
   |------------------+----------+-------------------+----------|
   | Proprietary      |   CN2    | 68-pin SCSI       |   CN7    |
   | connector -      |          | connector to host |          |
   | cache controller |          | - external        |          |
   | (optional)       |          |                   |          |
   |------------------+----------+-------------------+----------|
   | 50-pin SCSI      |   CN3    | 3-pin proprietary |   CN8    |
   | connector        |          | JST (RS-232)      |          |
   | channel 1 --     |          | connector - see   |          |
   | internal         |          | note below        |          |
   |------------------+----------+-------------------+----------|
   | 50-pin SCSI      |   CN4    | Power connector   |   CN9    |
   | connector        |          |                   |          |
   | channel 0 -      |          |                   |          |
   | internal         |          |                   |          |
   |------------------+----------+-------------------+----------|
   | 50-pin SCSI      |   CN5    |                   |          |
   | connector to     |          |                   |          |
   | host - external  |          |                   |          |
   | (optional)       |          |                   |          |
   |------------------------------------------------------------|
   |      Note: CN8, the JST connector, can be connected to a   |
   |      DE-9 serial connector using a supplied cable that     |
   |      performs signal conversion. This cable allows the     |
   |      Windjammer to be connected to a VT100/VT220 terminal  |
   |      or terminal emulator.                                 |
   |                                                            |
   |      Note: CN6 or CN7 connects the Windjammer controller   |
   |      to the host system. CN6 allows the Windjammer to      |
   |      interface to host systems with differential SCSI      |
   |      ports via an optional differential converter board.   |
   |                                                            |
   |      Note: The location of hard drive connectors differs   |
   |      on some boards. If your Windjammer version has a top  |
   |      cover, channel 0 is located on the bottom of the rear |
   |      panel and channel 1 on the top.                       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 TERMINATION CONFIGURATION                  |
   |------------------------------------------------------------|
   |  Channel   |   Controller   |     Termination Required     |
   |            |    Position    |                              |
   |------------+----------------+------------------------------|
   | Controller | At end of SCSI |  Internal host terminators   |
   |  to Host   |      bus       |          installed           |
   |------------+----------------+------------------------------|
   | Controller | Not at end of  |  Internal host terminators   |
   |  to Host   |    SCSI bus    |           removed            |
   |------------+----------------+------------------------------|
   | Controller |     Active     |  Internal host terminators   |
   |  to Host   |  termination   |           removed            |
   |            |    required    |                              |
   |------------+----------------+------------------------------|
   | Channel 0  | At end of SCSI |      Channel 0 internal      |
   |            |      bus       |    terminators installed     |
   |------------+----------------+------------------------------|
   | Channel 0  | Not at end of  |      Channel 0 internal      |
   |            |    SCSI bus    |     terminators removed      |
   |------------+----------------+------------------------------|
   | Channel 0  |     Active     |      Channel 0 internal      |
   |            |  termination   |     terminators removed      |
   |            |    required    |                              |
   |------------+----------------+------------------------------|
   | Channel 1  | At end of SCSI |      Channel 1 internal      |
   |            |      bus       |    terminators installed     |
   |------------+----------------+------------------------------|
   | Channel 1  | Not at end of  |      Channel 1 internal      |
   |            |    SCSI bus    |     terminators removed      |
   |------------+----------------+------------------------------|
   | Channel 1  |     Active     |      Channel 1 internal      |
   |            |  termination   |     terminators removed      |
   |            |    required    |                              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                         JST PINOUT                         |
   |------------------------------------------------------------|
   |            Pin             |          Description          |
   |----------------------------+-------------------------------|
   |             1              |            Ground             |
   |----------------------------+-------------------------------|
   |             2              |         Receive Data          |
   |----------------------------+-------------------------------|
   |             3              |         Transmit Data         |
   +------------------------------------------------------------+