BUSLOGIC, INC. ============== FLASHPOINT LW HOST ADAPTER Data Bus 32-bit PCI Card Size Half-length, half-height card Hard Drives supported Up to 7 SCSI or 15 Wide SCSI devices Floppy drives supported None +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | Function | Location | |---------------------+----------+----------------+----------| | 68-pin SCSI | CN1 | 50-pin SCSI | CN3 | | connector - | | connector - | | | external | | internal | | |---------------------+----------+----------------+----------| | 68-pin SCSI | CN2 | LED connector | LED | | connector - | | | | | internal | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-------+---------------+--------+---------------------------| | LED1 | Unidentified | On | Activity detected | |-------+---------------+--------+---------------------------| | LED1 | Unidentified | Off | Activity not detected | |-------+---------------+--------+---------------------------| | LED2 | Green | On | Low termination enabled | |-------+---------------+--------+---------------------------| | LED2 | Green | Off | Low termination disabled | |-------+---------------+--------+---------------------------| | LED3 | Green | On | High termination enabled | |-------+---------------+--------+---------------------------| | LED3 | Green | Off | High termination disabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | TECHNICAL NOTES | |------------------------------------------------------------| | Note: The FlashPoint LW host adapter automatically | | configures its own termination according to its | | placement within the SCSI bus. The low termination | | LED indicates that bits 0-7 of SCSI bus are | | terminated on the board. The high termination LED | | indicates that bits 8-15 of SCSI bus are terminated. | | | | Note: Only two connectors may be used at one time. | +------------------------------------------------------------+