ADVANCED INTEGRATION RESEARCH, INC. =================================== SCSI2V VESA BUS MASTER Data bus: 32-bit, VL-bus Size: Three/quarter-length, full-height card Hard drive Up to seven SCSI devices supported: Floppy drives Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB supported: drives +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-----------------------------------------------+------------| | 4-pin connector - Drive active LED | JP22 | |-----------------------------------------------+------------| | 50-pin SCSI connector - internal | P1 | |-----------------------------------------------+------------| | 50-pin SCSI connector - external | P2 | |-----------------------------------------------+------------| | 34-pin control cable connector - floppy drive | P3 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Hard drive <1GB supported | JP5 | pins 1 & 2 | | | under DOS | | closed | |---+--------------------------------+----------+------------| | | Hard drive >1GB supported | JP5 | pins 2 & 3 | | | under DOS | | closed | |---+--------------------------------+----------+------------| |>> | SCSI disconnect enabled | JP9 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | SCSI disconnect disabled | JP9 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | SCSI synchronous negotiation | JP13 | pins 1 & 2 | | | disabled | | closed | |---+--------------------------------+----------+------------| | | SCSI synchronous negotiation | JP13 | pins 2 & 3 | | | enabled | | closed | |---+--------------------------------+----------+------------| | | SCSI auto sense enabled | JP14 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | SCSI auto sense disabled | JP14 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | SCSI parity check enabled | JP15 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | SCSI parity check disabled | JP15 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Floppy drive enabled | JP19 | closed | |---+--------------------------------+----------+------------| | | Floppy drive disabled | JP19 | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | BIOS ADDRESS | |------------------------------------------------------------| | Address | JP1 | JP2 | |-------------------+--------------------+-------------------| |>> | D8000-DFFFFh | pins 2 & 3 closed | pins 2 & 3 closed | |---+---------------+--------------------+-------------------| | | C8000-CFFFFh | pins 2 & 3 closed | pins 1 & 2 closed | |---+---------------+--------------------+-------------------| | | D0000-D7FFFh | pins 1 & 2 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | HOST ADAPTER SELECT | |------------------------------------------------------------| | Address | JP3 | JP4 | |--------------------+-------------------+-------------------| |>> | First adapter | pins 1 & 2 closed | pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | Second adapter | pins 2 & 3 closed | pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | Third adapter | pins 1 & 2 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SCSI ADDRESS | |------------------------------------------------------------| | Select | JP6 | JP7 | JP8 | |--------+-----------------+----------------+----------------| |>> | 7 | pins 2 & 3 | pins 2 & 3 | pins 2 & 3 | | | | closed | closed | closed | |----+---+-----------------+----------------+----------------| | | 6 | pins 1 & 2 | pins 2 & 3 | pins 2 & 3 | | | | closed | closed | closed | |----+---+-----------------+----------------+----------------| | | 5 | pins 2 & 3 | pins 1 & 2 | pins 2 & 3 | | | | closed | closed | closed | |----+---+-----------------+----------------+----------------| | | 4 | pins 1 & 2 | pins 1 & 2 | pins 2 & 3 | | | | closed | closed | closed | |----+---+-----------------+----------------+----------------| | | 3 | pins 2 & 3 | pins 2 & 3 | pins 1 & 2 | | | | closed | closed | closed | |----+---+-----------------+----------------+----------------| | | 2 | pins 1 & 2 | pins 2 & 3 | pins 1 & 2 | | | | closed | closed | closed | |----+---+-----------------+----------------+----------------| | | 1 | pins 2 & 3 | pins 1 & 2 | pins 1 & 2 | | | | closed | closed | closed | |----+---+-----------------+----------------+----------------| | | 0 | pins 1 & 2 | pins 1 & 2 | pins 1 & 2 | | | | closed | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT REQUEST | |------------------------------------------------------------| | IRQ | JP10 | JP11 | JP12 | |--------+-----------------+----------------+----------------| | | 9 | pins 1 & 2 | pins 2 & 3 | pins 2 & 3 | | | | closed | closed | closed | |---+----+-----------------+----------------+----------------| | | 10 | pins 1 & 2 | pins 2 & 3 | pins 1 & 2 | | | | closed | closed | closed | |---+----+-----------------+----------------+----------------| |>> | 11 | pins 2 & 3 | pins 1 & 2 | pins 1 & 2 | | | | closed | closed | closed | |---+----+-----------------+----------------+----------------| | | 12 | pins 2 & 3 | pins 2 & 3 | pins 2 & 3 | | | | closed | closed | closed | |---+----+-----------------+----------------+----------------| | | 14 | pins 2 & 3 | pins 2 & 3 | pins 1 & 2 | | | | closed | closed | closed | |---+----+-----------------+----------------+----------------| | | 15 | pins 2 & 3 | pins 1 & 2 | pins 2 & 3 | | | | closed | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | I/O PORT ADDRESS | |------------------------------------------------------------| | Address | ISA0 | ISA1 | iSA2 | |--------------+-------------------+------------+------------| |>> | 338-33Fh | pins 1 & 2 closed | pins 1 & 2 | pins 2 & 3 | | | | | closed | closed | |---+----------+-------------------+------------+------------| | | 238-23Fh | pins 1 & 2 closed | pins 2 & 3 | pins 1 & 2 | | | | | closed | closed | |---+----------+-------------------+------------+------------| | | 138-13Fh | pins 1 & 2 closed | pins 2 & 3 | pins 2 & 3 | | | | | closed | cosed | |---+----------+-------------------+------------+------------| | | 358-35Fh | pins 2 & 3 closed | pins 1 & 2 | pins 1 & 2 | | | | | closed | closed | |---+----------+-------------------+------------+------------| | | 258-25Fh | pins 2 & 3 closed | pins 1 & 2 | pins 2 & 3 | | | | | closed | closed | |---+----------+-------------------+------------+------------| | | 158-15Fh | pins 2 & 3 closed | pins 2 & 3 | pins 1 & 2 | | | | | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | MOTHERBOARD SPEED SELECT | |------------------------------------------------------------| | Speed | JS1 | JS2 | JS3 | JS4 | |------------+-----------+-----------+-----------+-----------| | 33MHzHz or | pins 1 & | pins 1 & | pins 1 & | pins 1 & | | less | 2 closed | 2 closed | 2 closed | 2 closed | |------------+-----------+-----------+-----------+-----------| | 50MHz | pins 2 & | pins 2 & | pins 2 & | pins 2 & | | | 3 closed | 3 closed | 3 closed | 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | Default settings are shown for use in an ISA machine. | | | | If board is to be used in an EISA machine, set jumpers JP1 | | to JP15 and ISA0, ISA1, ISA2 - to pins 1 & 2 closed. An | | EISA configuration utility must also be used to set up the | | board. | | | | If using a DX/2 50 or DX/2 66processor, set jumpers JS1 - | | JS4 to "33MHz or less" setting. | +------------------------------------------------------------+