ALPHA RESEARCH CORPORATION ========================== S425I ISA +------------------------------------------------------------+ +------------------------------------------------------------+ Data bus: 16-bit, ISA Size: Three/quarter-length, full-height card Hard drive supported: Four IDE (AT) interface drives Floppy drives Two 360KB, 720KB, 1.2MB, or 1.44MB supported: +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | |--------------------------------------------+---------------| | IDE drive interface (Primary) | CN1 | |--------------------------------------------+---------------| | IDE drive interface (Secondary) | CN2 | |--------------------------------------------+---------------| | Floppy drive interface | CN3 | |--------------------------------------------+---------------| | Hard Drive activity LED | JP1 | |--------------------------------------------+---------------| | Speaker | JP2 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |-----------------------------------+--------------+---------| |>> | IDE Bus 1 (CN1) resistors | JDR0 | open | | | open | | | |---+-------------------------------+--------------+---------| | | IDE Bus 1 (CN1) resistors | JDR0 | closed | | | shorted | | | |---+-------------------------------+--------------+---------| |>> | IDE Bus 2 (CN2) resistors | JDR1 | open | | | open | | | |---+-------------------------------+--------------+---------| | | IDE Bus 2 (CN2) resistors | JDR1 | closed | | | shorted | | | |---+-------------------------------+--------------+---------| |>> | Floppy drive enabled | JP3/jumper 4 | closed | |---+-------------------------------+--------------+---------| | | Floppy drive disabled | JP3/jumper 4 | open | |---+-------------------------------+--------------+---------| |>> | Primary hard drive enabled | JP3/jumper 5 | closed | |---+-------------------------------+--------------+---------| | | Secondary hard drive enabled | JP3/jumper 5 | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | BIOS ADDRESS CONFIGURATION | |------------------------------------------------------------| | Address | JP3/jumper 1 | JP3/jumper 2 | JP3/jumper 3 | |---------------+--------------+--------------+--------------| | DC000-DFFFFh | closed | closed | closed | |---------------+--------------+--------------+--------------| | DC000-DFFFFh | closed | closed | open | |---------------+--------------+--------------+--------------| | D8000-DBFFFh | closed | open | closed | |---------------+--------------+--------------+--------------| | D4000-D7FFFh | closed | open | open | |---------------+--------------+--------------+--------------| | D0000-D3FFFh | open | closed | closed | |---------------+--------------+--------------+--------------| | CC000-CFFFFh | open | closed | open | |---------------+--------------+--------------+--------------| | D8000-CBFFFh | open | open | closed | |---------------+--------------+--------------+--------------| | Disabled | open | open | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | When using this controller, the system will see the drives | | attached to each connector as a single drive. i.e.: if you | | have two 100MB drives attached to CN1 the system will see | | one 200MB drive. However, if have two drives you would | | like to be recognize individually, you may attach one to | | CN1 and the other to CN2. | | | | Closing Jumpers JDR0 and JDR1, which shorts the resistors | | on the IDE buses, helps to eliminate drive incompatibility | | caused by different noise filtration methods. | | | | This controller supports 256KB, 1MB, or 4MB fast page mode | | SIMM's, 80nsec or faster. At least one bank must be filled | | for proper operation. | +------------------------------------------------------------+