PowerTalk for Power Macintosh (1.0.3)
 
The enclosed file is a self-extracting archive of a Disk Copy 1440K disk image.
To use, download, double-click the downloaded file (this decompresses it),
and use Disk Copy to create a disk.
 
This disk allows you to install PowerTalk on your Power Macintosh computer. For
more information about PowerTalk, please read the PowerTalk Userıs Guide
included with System 7 Pro.
 
Installing PowerTalk
 
To install your PowerTalk software, you need four disks:
€ PowerTalk Install Me First (the disk that contains this document)
€ PowerTalk
€ PowerTalk 2
€ Tidbits
The PowerTalk, PowerTalk 2, and Tidbits disks are included in your System 7 Pro
package.
 
IMPORTANT:  You must have System 7 Pro, which contains the PowerTalk, PowerTalk
2, and Tidbits disks, to use the PowerTalk Install Me First disk to install
PowerTalk on your Power Macintosh. The installation software on your PowerTalk
Install Me First disk will only work on Power Macintosh computers.
 
IMPORTANT: Before you install PowerTalk software, turn off any automatic virus
detection programs you have on your computer. After the installation is
complete, you can turn the virus detection programs back on.
 
To install PowerTalk software, follow these steps:
 
1. Go to the Finder desktop.  If your computer is off, turn it on. If itıs
   already on, quit any programs that are running.
 
2. Insert the PowerTalk Install Me First disk.
   The diskıs icon appears on the desktop.
 
3. Open the disk by double-clicking its icon.
 
4. Open the Installer by double-clicking its icon.
   The Easy Install dialog box appears.
 
6. Click the Install button.
   The Installer takes a few moments to calculate what needs to be done and
   then begins to copy files. The whole process may take several minutes.
 
7. When the PowerTalk Install Me First disk is ejected, follow the instructions
   you see on the screen. Youıll have to swap disks a few times. Each time, the
   Installer ejects one disk and asks you to insert another.
 
8. When you see a message reporting that the installation has been successfully
   completed, follow the instructions on the screen. If you turned off any
   automatic virus detection programs on your Power Macintosh, turn them back
   on now.