CLONING A VERSION 2.4

1.   Burn a chip with UKEYREAD

2.   Put UKEYREAD chip in U30

3.   Semi-scrambled keys show on screen.

4.   Insert them in UKEY.GEN program.

5.   UKEY 1-4 are then red from left to right.

6.   UKEY 1 is 00 UKEY 2 is 01 UKEY 3 is 02 UKEY 4 is 03.

7.   Ignore the 00 at end of each keys.

8.   There are 7 keys per line if your keys read 1122 3344 5566
     77xx.

9.   Insert (UKEY 1) 00 at location 3FC5 TO 3FCB LABEL 00 AT 3FC4
       "    (UKEY 2) 01 "     "     3FB1 TO 3FB7   "   01 AT 3FB0
       "    (UKEY 3) 02 "     "     3FB9 TO 3FBF   "   02 AT 3FB8
       "    (UKEY 4) 03 "     "     3FA1 TO 3FA7   "   03 AT 3FA0

     Insert I.D. number at location 3FC0-3FC3 ==>BACKWARDS!!<===
EXAMPLE: If your I.D. number is  0103 2CAB
                                 0101 FBE9

          then insert it as follows: AB 2C 03 01
                                     E9 FB 01 01

10.  This loads U7 keys.

11.  Insert RAMVIEW chip in U30 and press "HELP" button.

12.  Copy RAM  with a videotape at location 6100 to 62FF.

13.  This is also inserted in RABBIT program. From location 2D00
     TO 2EFF.

14.  Only monthly keys and I.D. number must be changed.

15.  The monthly keys are read on RAMVIEW and transfered to
     RABBIT program as follows respectivly:

          6107-611A      TO        2D07-2D1A NEXT MONTHS KEYS    
          616A-617D      TO        2D6A-2D7D CURRENT MONTH KEYS  
          6200-6213      TO        2E00-2E13   "      "     "    
          6235-6238      TO        2E35-2E38 UNIT I.D.           
          6163-6164      TO        2D63-2D64 ***                 
          617C-617D      TO        2D7C-2D7D ***
          *** THESE LINES MUST BE THE SAME

16.  Make these changes and burn a chip with new program.

17.  Plug in U30, press "CANCEL" first then press "HELP" twice to
     make sure unit is loaded with new I.D.

18.  With RAB chip in the unit should turn on when tuned to a
     subscribed  channels.

19.  Replace RABBIT chip with 3MT or KEYMASTER.V24

20.  If KEYMASTER is used,after unit is inserted, press "SETUP 6"
     to get audio.




                 CONVERTING A VERSION 3.0 TO 2.4


1.   Follow steps 1 - 12 listed above.

13.  Monthly keys are shifted in location from V2.4. So they need
     to  be copyed from these new locations and inserted in
     RABBIT. 

          RAMVIEW V3.0                  RABBIT V2.4
          6107-611A      TO        2D07-2DIA NEXT MONTHS KEYS
          6169-617C      TO        2D6A-2D7D CURRENT MONTHS KEYS
          61FF-6212      TO        2E00-2E13 CURRENT MONTHS KEYS
          6235-6238      TO        2E35-2E38 UNIT I.D.
          617B-617C      TO        2D63-2D64 MUST BE THE SAME

14.  Conversion is complete. Follow the above steps 16-20 on
     cloning.


                     HAVE FUN SHOOTING G.I.


This data was supplied to you free by the "FLORIDA V.C. HACKER"

Compiled  and distributed by the "VV" series group. This data is
free and classified as public domain. If you paid for it you were
cheated!. If any errors are found please notify me at once with
the correction. 

                                        thanks...

                                        Dave Nagel
                                        93 N Rancho Pl
                                        El Sobrante, Ca. 94803
Downloaded From P-80 International Information Systems 304-744-2253