I patched together the documentation file 032-run-.wiz as best I could...
  hope this helps. I haven't run the program in my 032 VCII to verify the
  displays but wanted to get this on the board ASAP... Bruce



  KEYPRESS 999 = 1.- INSTALLATION
                 2.- UNIT SETTINGS
                 3.- RATING CELING
                 4.- RATING PASSWORD
                 5.- STOCK OPERATION MODE
                 6.- TEST OPERATION MODE
                 7.- STOCK BOX MENU
                 8.- ENTER CIPHER CODE    ( ENTER 1 TO 8 )

  SETUP 1 Looks like this and does not display the UNIT ID NUMBER
         (which was determined earlier).

  KEYPRESS = SETUP 1  V.U. METER   :50/50
                      SEVICE ID :77
                      TEST MODE ONLY 

  SETUP 2, SETUP 3, SETUP 4,  all funtions as in standalone VideoCipher.
 
  SETUP 5  will return the unit to STOCK OPERATION and it will receive only
           the stations that it us authorized to. This is useful in determining
           if they are turning off the channels that you had authorized while 
           turning you on to channels that you have not authorized. Note: after
           pressing SETUP 5 you must change channels for this to take effect.

  SETUP 6  will resume to TEST OPERATION.

  SETUP 7 will return to the stock box menu with only setups 1 through 4 being
          displayed as in a stock VIDEOCYPHER.

  SETUP 8 will display the following screen:

           KEYPRESS = SETUP 8 2899  6005  8346 F22E

           ENTER A CIPHER CODE.....


  The number at the top of the page are  the previous ciphercodes. If you have
  not yet entered any cipher codes, then the top line will display zeros.
  To enter new cipher codes simply type them in in additive decimal numbers.
  For example the CIPHER CODES for FEBRUARY are: (hex) 28 99 60 05 83 46 F2 2E

  THESE SHOULD BE ENTERED AS: 02080909 < ENTER >

                              06000005 < ENTER >

                              08030406 < ENTER >

                              96020295 < ENTER >
 
   As you type in each line, the number will appear on the bottom row on the
   right hand side of the screen and they will disappear when you press enter.
   These codes will bemail to you monthly and you will receive then 15 days
   before they are needed. Once the codes are typed in and the VideoCipher
   is placed in TEST MODE, the sound will turn on and the SETUP 0 screen will
   look like this:    V 3.1
                      5F0012  0000  1565
                      001A2111  00  2E77 
                      8301    00    SA  2F9435 



 If interested, leave a message to Oscar Rangel



Downloaded From P-80 International Information Systems 304-744-2253