A GENERIC MENU FOR THE "GENERIC KEYS-R-US" TYPE CHIP ( for 010X units )
     =======================================================================


   A. I SUGGEST THAT YOU TUNE TO AN "FA" VIDEOCYPHER TRANSPONDER FOR THE
      FOLLOWING   ....JUST A SAFETY PRECAUTION FROM THE DATA STREAM.

   B. ENSURE THE UNIT POWER IS OFF WHEN EXCHANGING CHIPS AND EXCHANGING THE
      MODULE.

   C. PLACE THE "GKEYSRUS" CHIP IN U-30, AND POWER BACK UP.

 ................................ ARCHIVE......................................

 READ SEED KEYS:

   -   SETUP,  1                                ( COPY DOWN THE UNIT ID# )

   -   SETUP,  4,   PASSWORD,  ENTER            ( SCREEN WILL FLASH )

   -   SETUP,  2,                               ( COPY DOWN THE SEED KEYS )

   -   SETUP,  SETUP                            ( RETURNS TO MAIN MENU )


 READ MONTHLY KEYS:

   -   SETUP,  9,  1                            ( REPAIR MENU, VIEW U20 )

   -   6100  -->                                ( COPY DOWN 1st 4 LINES )

   -   SETUP,  9,  1                            ( GOING FOR SECOND SET )

   -   6160  -->                                ( COPY DOWN 1ST 4 LINES )


 READ LOCATION CODE ( OPTIONAL ):

   -   SETUP,  9,  1

   -   61C0  -->                                ( COPY LAST LINE )


 READ "PARENTAL LOCKOUT" PASSWORD CODE ( OPTIONAL ):

   -   SETUP,  9,  1

   -   6260  -->                                ( COPY 2nd LINE )

..................................REPROGRAM...................................

1. -   SETUP,  9,  3,  PASSWORD,  -->           ( TO CHANGE BOX ID# )

2. -   XXXXXXXX,  -->                           ( 1st 8 CHAR OF THE UNIT# )

3. -   SETUP,  9,  4,  PASSWORD,  -->           ( TO CHANGE BOX KEYS )

4. -   00 XX XX XX XX XX XX XX,   -->           ( ENTER THE SEED KEYS & DON'T
                                                  FORGET - THE KEY# FIRST )
5. -   ( REPEAT STEP 3 & 4 FOR KEY "01" )

6. -   ( REPEAT STEP 3 & 4 FOR KEY "02" )

7. -   ( REPEAT STEP 3 & 4 FOR KEY "03" )

8. -   UNPLUG THE UNIT FOR A FEW SECONDS        ( TO RESET THE BOX )

9. -   POWER BACK UP,  SETUP,  1                ( TO VERIFY UNIT# IS OK, AND
                                                  THE 9th & 10 DIGITS ARE "FF")

10.-   SETUP,  9,  2,  PASSWORD,  -->           ( TO CHANGE MONTHLY KEYS )

11.-   6100  -->

12.-   XXXX,  -->,  XXXX,  -->,  ...ETC         ( ENTER THE DATA FROM THE 4
                                                  LINES YOU RECORDED EARLIER )

13.-   SETUP,  9,  2,  PASSWORD,  -->           ( TO CHANGE THE OTHER MO. KEYS )

14.-   6160  -->

15.-   XXXX,  -->,  XXXX,  -->,  ...ETC         ( ENTER THE DATA FROM THE 4
                                                  LINES YOU RECORDED EARLIER )

16.-   SETUP,  9,  2,  PASSWORD,  -->           ( TO CHANGE SERVICE ID )

17.-   6247  -->,  C4  -->

18.-   SETUP,  9,  2,  PASSWORD,  -->

19.-   6223  -->,  D0  -->

         ...... THE FOLLOWING STEPS ARE OPTIONAL .....

20.-   SETUP,  9,  2,  PASSWORD,  -->           ( TO CHANGE LOCATION CODE )

21.-   61F8  -->

22.-   XX,  -->,  XX,  -->,  ...ETC             ( ENTER THE LOC CODE DATA )

23.-   SETUP,  9,  2,  PASSWORD,  -->           ( TO WRITE PARENTAL PSWD )

24.-   6268  -->

25.-   XX,  -->,  XX,  -->,  ...ETC             ( ENTER THE LOC CODE DATA )

26.-   SETUP                                    ( FINISHED AT LAST !!! )

...............................................................................

CHEAT NOTES:

   - DON'T FORGET THAT TO ENTER A-F, USE THE --> TO CHANGE 1-6 KEYS TO A-F KEYS.

   - TO CORRECT A BAD ENTRY, USE THE <-- .

   - IF DIGIT 9 & 10 OF THE ID# ARE NOT "FF", THEN RESTART FROM STEP #3.