\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
/\/\/\   PHLAMETHROWER PHUN!   \/\/\/\/
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
HOW TO MAKE YOUR OWN PERSONAL PHLAME-
THROWING DEVICE.
              BY PROWLER

YOU'LL NEED:

1. SMALL GARDEN SPRAYER (MUST BE METAL)
2. A BACKPACK OF REASONABLE SIZE.
3. A LENGTH OF TUBING (STIFF PLASTIC) 
   ABOUT THE SAME DIAMETER AS THE 
   TUBING ON THE SPRAYER 2-3' LONG.
4. A CIRCLE OF METAL ROUGHLY THE SAME
   DIAMETER AS A GRAPEFRUIT.
5. A SOLDERING IRON
6. SOME SOLDER, BLACK TAPE, SEALANT.
7. SOME SMALL HANDLES, AND INSULATION


NOW, HERES HOW TO MAKE THE SUCKER:

    TAKE THE TUBING OFF OF THE GARDEN 
SPRAYER (MAINLY CAUSE THE FUEL WILL EAT
THROUGH IT, AND YOU WILL BE A CRISPY
CRITTER.)
    REPLACE IT WITH THE HARD PLASTIC 
TUBING (3).
    SOLDER THE CIRCLE OF METAL ON JUST
BELOW THE NOZZLE SO THAT YOU CANNOT GET
CAUGHT BYUY THE SPRAY.
    SOLDER THE HANDLES ONTO THE METAL
PART OF THE SPRAYER TUBE, AND SPRAY 
THEM WITH THE INSULATION, THEN WRAP 
THEM IN BLACK TAPE.
    PUT THE TANK IN THE BACKPACK, AND
ZIP IT UP SO IT'S TIGHT, THEN HOOK THE
ZIPPERS TOGETHER WITH SOME WIRE.

YOU NOW HAVE A SMALL RELIABLE PHLAME
THROWER. 

(>PHLAMETHROWER DOX:
1. NEVER LET YOUR TANK RUN TOO LOW.
2. ONLY USE THE FUEL LISTED BELOW.
3. DO NOT ALLOW THE TANK TO BECOME
   PUNCTURED, OR DENTED
4. NEVER USE AN OPEN PHLAME TO LIGHT
   THE PHLAMETHROWER.
 STICK BY THIS, AND YOU SHOULD BE ALL
 RIGHT!

(>PHLAMETHROWER FUEL:
  
  THE BEST FUEL I HAVE FOUND IS:
  1 PART COLEMAN'S LANTERN FUEL
  2 PARTS KEROSENE
  1 PART GAS
---------------------------------------
NEVER USE STRAIGHT GAS ONLY!!!!!!!!!!!
---------------------------------------

DISCLAIMER:
 PROWLER IS NOT RESPONSIBLE IF YOU ARE
MAIMED, ROASTED, OR OTHERWISE HURT WITH
A HOMEMADE PHLAMETHROWER. I AM ALSO NOT
RESPONSIBLE FOR ANY DAMAGE YOU MIGHT 
INCUR WITH IT. 

NOW GO TURN SOME LOCAL BUREAUCRAT INTO
A CRISPY CRITTER!

         PROWLER                                                                     
                                                   
DOWNLOADED FROM P-80 SYSTEMS......
Downloaded From P-80 International Information Systems 304-744-2253